Migration to newer versions

SweepMe! is continuously developed and there might be changes in a newer versions which are not compatible with standards used so far. This guide shall help you to ease the migration to a newer version.

Migration to version 1.5.3.x

• When using the installer, a path like "C:\SweepMe!\SweepM!x.x.x.x." will be suggested. Thus, different versions can be installed at the same time. However, please make sure that there is no old version in "C:\SweepMe!" without any version-related subfolder.

• Setting are now stored in a public folder of the public user of the operating system. Copy your old settings from your previous version to the public settings folder that you can find via File -> Open Folder -> Settings

• SweepScripts are now stored in a public folder of the public user of the operating system. Copy your old SweepScripts from your previous version to the public SweepScripts folder that you can find via File -> Open Folder -> Public

• Calibration files, e.g. used for the Device Classes of the Spectrometer module, are now stored inside a public folder as well. Copy your calibrations to the folder 'CalibrationFiles' inside the public folder which can be found via File -> Open Folder -> Public.

• Whenever Device Classes need external libraries such as dll files, they can be saved now in the folder 'ExternalLibraries' which can be found inside the public folder (File -> Open Folder -> Public)

• Your measurement data will be saved now in the folder 'Measurement' located in the public folder (File -> Open Folder -> Public). Please renew any desktop link that you created to easily find your data.

• Device Class development: It might be necessary to change the use of the function "set_GUIparameter". The dictionary which is returned by this function must now contain all keys related to GUI elements that should be enabled and a corresponding default values. Thus, users can see which parameters are supported by a Device Class.

• Device Class development: In case your Device Class was developed for the Module Logger or Switch, the Parameters-Line is no longer available. Instead, you can dynamically create GUI elements yourself, just by returning keys and default values using "set_GUIparmeter"