Examples: Difference between revisions

From SweepMe! Wiki
Jump to navigation Jump to search
(Created page with "We will show you here some examples to give you an idea how to create your measurement procedures with SweepMe!. All screenshots show the sequencer and how the Modules are org...")
 
No edit summary
Line 1: Line 1:
We will show you here some examples to give you an idea how to create your measurement procedures with SweepMe!. All screenshots show the sequencer and how the Modules are organized.
Please find below some typical examples and use cases:


== Logging of sensor values ==
* Logging of sensor values, e.g. temperature, pressure, and humidity
tbd
* Current-voltage characteristics, e.g. LEDs, solar cells, and transistors
 
* Angle dependent spectra, e.g. to characterize light sources
== Current-voltage characteristics ==
* Sensitive EQE measurements
tbd
* Thin film deposition in vacuum chambers
 
* wafer prober tests
== Sensitive EQE measurements ==
* Temperature dependent material and device characterization
tbd
 
== Transistor characterization ==
tbd
 
== Angle dependent spectra ==
tbd
 
== Solar cell characterization ==
tbd

Revision as of 23:15, 4 December 2020

Please find below some typical examples and use cases:

  • Logging of sensor values, e.g. temperature, pressure, and humidity
  • Current-voltage characteristics, e.g. LEDs, solar cells, and transistors
  • Angle dependent spectra, e.g. to characterize light sources
  • Sensitive EQE measurements
  • Thin film deposition in vacuum chambers
  • wafer prober tests
  • Temperature dependent material and device characterization