GPIB: Difference between revisions

Revision as of 12:24, 29 July 2018

SweepMe! relies on the pyvisa module [1].

Install the latest version of ni-visa runtime [2]
Install the driver of your GPIB interface card or USB adapter which you get from the manufacturer
- National Instruments [3]
- Keithley/Tektronix KUSB-488B [4]
- Keithley/Tektronic KUSB-488A [5]
- Keysight [6]

Not supported yet, has to be implemented on the Device Class level on your own using a COM port

Revision as of 12:23, 29 July 2018 (view source) Afischer (talk \| contribs) No edit summary ← Older edit		Revision as of 12:24, 29 July 2018 (view source) Afischer (talk \| contribs) No edit summary Newer edit →
Line 11:		Line 11:

	Not supported yet, has to be implemented on the Device Class level on your own using a COM port		Not supported yet, has to be implemented on the Device Class level on your own using a COM port
	** Prologix GPIB controller [http://prologix.biz/~~?gclid=CjwKCAiAr_TQBRB5EiwAC_QCq80T7CBhEIFtK-dlt0LbfKyYM-vDRwX_aDtygzXa43SAFL9ueKyiohoC0TAQAvD_BwE~~]		** Prologix GPIB controller [http://prologix.biz/controllers.html]