GPIB: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 3: | Line 3: | ||
== Requirements == | == Requirements == | ||
* Install the latest version of ni-visa runtime [http://www.ni.com/download/ni-visa- | * Install the latest version of ni-visa runtime [http://www.ni.com/download/ni-visa-run-time-engine/6647/en/] | ||
* Install the driver of your GPIB interface card or USB adapter which you get from the manufacturer | * Install the driver of your GPIB interface card or USB adapter which you get from the manufacturer | ||
** National Instruments [http://www.ni.com/download/ni-488.2-17.0/6627/en/] | ** National Instruments [http://www.ni.com/download/ni-488.2-17.0/6627/en/] |
Revision as of 01:47, 14 August 2018
SweepMe! relies on the pyvisa module [1].
Requirements
- Install the latest version of ni-visa runtime [2]
- Install the driver of your GPIB interface card or USB adapter which you get from the manufacturer
Not supported yet, has to be implemented on the Device Class level on your own using a COM port
- Prologix GPIB controller [7]