Troubleshooting: Difference between revisions
Jump to navigation
Jump to search
(added Compatibility mode as a possible solution) |
No edit summary |
||
| Line 11: | Line 11: | ||
! Solution | ! Solution | ||
|- | |- | ||
| rowspan=" | | rowspan="4" | SweepMe! does not start or crashes during startup | ||
| SweepMe! installation is broken | | SweepMe! installation is broken | ||
| Go to [https://sweep-me.net/download https://sweep-me.net/download] and download and install SweepMe! again. | | Go to [https://sweep-me.net/download https://sweep-me.net/download] and download and install SweepMe! again. | ||
| Line 20: | Line 20: | ||
| The problem occurs only after a Windows Update or on a computer with a new Windows Version | | The problem occurs only after a Windows Update or on a computer with a new Windows Version | ||
| Right click on SweepMe!.exe and click on Properties, select the Compatibility tab, and choose Windows 8 or Windows 7 to run SweepMe! in this compatibility mode or try different settings. | | Right click on SweepMe!.exe and click on Properties, select the Compatibility tab, and choose Windows 8 or Windows 7 to run SweepMe! in this compatibility mode or try different settings. | ||
|- | |||
| Starting SweepMe! using a command line yields "LoadLibrary(pythondll) failed". | |||
| This error typically occurs if you start SweepMe! from a path which is not supported by your Windows language settings and charakters of your path are not correctly shown in the Windows command line. Please change your SweepMe! path or change your Windows language settings in order to support all charakters. | |||
|- | |- | ||
| rowspan="3" | The measurement does not start | | rowspan="3" | The measurement does not start | ||
Revision as of 00:19, 21 December 2017
On this page you can find information on where to start if something does not work as desired.
Collecting Information
In the SweepMe! directory, you will find a file called debug.log, as long as SweepMe! is not started in the debug mode. In this file you may find useful information about a problem. If you do not know what the messages mean, this information can still be useful for others, so always attach the debug.log file when asking for support. Please note: This file may be empty if SweepMe! is still running. So close SweepMe! before accessing the file.
Common Problems
| Problem | Reason | Solution |
|---|---|---|
| SweepMe! does not start or crashes during startup | SweepMe! installation is broken | Go to https://sweep-me.net/download and download and install SweepMe! again. |
| A defective component leads to a crash | Delete all Device Classes in the DeviceClass folder, that have been provided by third parties. | |
| The problem occurs only after a Windows Update or on a computer with a new Windows Version | Right click on SweepMe!.exe and click on Properties, select the Compatibility tab, and choose Windows 8 or Windows 7 to run SweepMe! in this compatibility mode or try different settings. | |
| Starting SweepMe! using a command line yields "LoadLibrary(pythondll) failed". | This error typically occurs if you start SweepMe! from a path which is not supported by your Windows language settings and charakters of your path are not correctly shown in the Windows command line. Please change your SweepMe! path or change your Windows language settings in order to support all charakters. | |
| The measurement does not start | The sequencer is not filled correctly | Go to the Sequencer Tab in SweepMe! an put the correct Measurement Classes there. Also read about the Sequencer for complex measurements. |
| One or more devices are not configured correctly | Go to the device configuration tab of every device you use in the sequencer and check if you selected the correct device, port and parameters. | |
| One or more of the used Device Classes are broken | Run the device-manager.exe and check if updates for the device class are available. You can also go to https://sweep-me.net/devices.php and check the information about your device. | |
| Other | Other | Report a Problem or Bug on the SweepMe! support center website. |
Reporting a Bug
To report a problem or a bug, go to https://support.sweep-me.net. Describe your problem or how to reproduce the bug as detailed as possible. Also attach the debug.log file and a settings file (see Loading and Saving Settings for instructions to create a settings file) that can be loaded to reproduce the bug.