Sequencer

The sequencer is a SweepMe! tool to create your own sequence of measurements. Items can be placed by drag&drop from a list of all available items/measurements and deleted by selecting them folowed by pressing 'Del(ete)' on the keyboard. Each item represents either a measurement communicating with an external device or a certain internal procedure doing some operation like MakeFile, or PlotData.

The sequencer presents all measurements in a tree like hierarchy. The more they are shifted to the right side, the lower the level of hierarchy. The structure of the tree allows for serial and parallel arrangement of the items. Thus, very complex measurement scenarios can be created.

Serial arrangement: Items only have either one parent item of higher hierarchy, one child item of lower hierarchy, or both.

Parallel arrangment: Multiple items are placed at the same level of hierarchy.

In general, a full measurement sequence can be represented by various serial arrangements and parallel arrangements. Whenever a parallel arrangement is created, the tree gets new branches which are individually processed. For simple measurements, we recommend to avoid parallel arrangements and solely create serial arrangments

Setting and reading

All items have at least one value which will used to indicate its presence in the tree, and to make it participating in the read out of the sequence. Some items, however, have multiple values, e.g. a Source-Measure-Unit SMU typically has several values in order realize a current-voltage curve.

When reading out the sequence represented by the tree, the values of each item are iterated, and for each value of one item, the prior procedure is again done for the children items which are below in the hierarchy of the tree.

There is a crucial difference between setting a value and reading a value!

Setting a value: Whenever values of an item are iterated, they are forwarded to their MeasurementClasses. As a consequence, the sequence of items, has a crucial impact on the measurement procedure, i.e. in which order parameters are applied to your devices.

Reading a value: Whenever the end of a branch of the tree is reached, reading of the device parameters is started. Standardized SweepMe! functions are called in order to apply, measure, and call the parameters of all items of the current branch of the tree. Thus, independent of the exact serial arrangement in the current branch, all items are read out. The major difference is the order of the data in the saved results file and the order of items appearing in the