Poweron()
The function 'poweron' is called when a module becomes active, i.e. when it becomes part of an active branch. At this point, configure() has already been called for all modules of the branch. Then, 'poweron' is called for all modules of the branch one after another, followed by signin(). Like 'configure', it is not called again if the branch changes but the module remains active.
Use 'poweron' to switch on the output of an instrument, e.g. the output of an SMU or a laser. As SweepMe! first configures all modules and then switches them on directly one after another, all instruments reach a well-defined state quickly.
If several channels of one instrument must be switched on at the same time, use self.device_communication to share information between the driver instances and let one channel switch on all channels.
The counterpart is poweroff().